Top Quality Plastic Injection Mold
|Terms of Trade:||FOB|
|Min. Order:||1 Set/Sets|
|Delivery Time:||40 Days|
|Place of Origin:||China|
|Supply Ability:||30 sets per month|
|HS Code: 8480719090|
Model No.: M170161
Shaping Mode: Injection Mould
Mould Cavity: Single Cavity
Plastic Material: PC
Process Combination Type: Single-Process Mode
Runner: Hot Runner
Design Software: UG
1,Two / Three Plate Moulds: Three-plate molds are cold runner tools, but by adding a third plate to the runner system, you are able to locate your injection point into virtually any location on the tool. This is usually less expensive than adding a hot runner system, however this type of mold often has large and unwieldy runners, which can be more difficult to automate.
2,Prototypes: A prototype mold is a low production mold that is used to prove out a concept. These molds are less expensive due to their materials and they lack durability.
3, Cavitation: A mould can have either a single cavity to produce one part per cycle or multiple cavities to produce several parts per cycle. A single cavity mold will be the most cost effective in terms of the cost to product the mold, but overall cost of producing parts will be more expensive because each cycle of injection molding using a single cavity mold will only produce on mart. A multi cavity mold is typically larger and more complex, therefore more expensive than a single cavity mold, but the overall cost of the finished part will be reduced due to increased production of numerous finished parts per cycle of injection molding. The customer should consider both factors when determining single cavity over multi-cavity molds.
4,Family Mould: A multi-cavity mold can be used to create a series of different parts within the same mold.
5,Cold Runner Moulds: Cold runner molds are traditional molds that utilize sprues, runners and gates into the part. This is typically the least complicated form of a mold. The sprue and runners do result in excess material used to make the part/parts, which may be re-ground and re-processed for future use. Dealing with more advanced, high-cost materials such as engineering and medical grade resins or the inability to use regrind in your application may lend itself to using a more efficient hot runner mold for your project.
6,Insulated Moulds: Insulated Runner tools resemble more traditional cold runner molds but utilize cartridge heaters or other methods of heating to form a surrounding layer of molten resin, forming an insulated [cull" to create a similar effect to a hot runner system. This approach is less expensive than using a hot runner which requires a temperature controller and also has the benefit of allowing for faster color and material changes. However insulated runners are not suitable for all types of materials and typically do not work well with more demanding engineering grade resins.
|Product Description||Part Name||Plastic Injection Molding Scanner Halter|
|Part Size(mm)|| 800*400*460 |
|Mould Description||Cavity Insert Material|| 738HHRC33-37 |
|Core Insert Material|| 738HHRC33-37 |
|Slider Insert Material|| 738HHRC33-37 |
|Mold parts Standard||Hasco|
|Mould Life Time (Shots)||300,000|
|Mould Type||Formal mold|
|Runner Description||Hot runner|
|Injection Gate Type||Tip gate|
|Ejection System||Ejector pin|
|Injection moulding machine||280T|
Top quality Plastic Injection Mold with professional project management service in Shenzhen,China 3K Mold is ISO-9001: 2008 certified. We use formal quality systems to manage the overall quality process and use precision measurement facilities by our well-trained team. All tooling and parts produced at our facility are constantly monitored by our Quality Assurance Department to meet your specifications.
Quality control Center:
3K team committed to meet customer quality and delivery request. The main quality control process as following:
Incoming quality control (IQC)
In process quality control (IPQC)
Quality assurance (QA)
Quality management flow:
1. Mold base inspection
2. Steel inspection
3. Mold component inspection
4. Electrodes inspection
5. Mold checking before assembly
6. (FAI, CPK) First Article dimension report
7. Mold checking before delivery
3K Mold Co., Ltd. was established in July 2008, Which located in Sha Jing town, Baoan District, Shenzhen, China. It is a comprehensive enterprise that engaged in plastic injection mould design&making, plastic product production and processing service.
Our main business scope: Plastic Injection Mould, 2K Mold, Stack mould, Multi cavity Mould, High Quality Mould, Over moulding, Precision Injection Mould and Die Casting Mould.
As a full service supplier, 3K Mold provides our customers with concept, design and development services as well as full product testing and assembling.
Our broad array of in house manufacturing capabilities allows 3K Mold to provide unparalleled vertical integration so that we can provide our customers best in class product cost and quality.The passion for product and process innovation is part of our culture. Every one of our 100 team members is part of this process. It is this passion that keeps our team engaged to exceed our customers` expectations.
- Company Name: 3K Mold Co., Limited
- Representative: Geng Shiwei
- Product/Service: Plastic Injection Mould , Two Shot Injection Mould , High Quality Plastic Injection Mould , Automotive Plastic Injection Mould , Hot Runner Injection Mould , Over Mould Maker
- Capital (Million US $): 10,000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: 4
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: 15th BLDG, Heyi BFYF Industrial Zone, Jincheng Road, Shajing, Bao'an District
- Contact Person: Ms. Angel Qin
- Tel: 86-0755-89490189
Premium Related Products